Prof. S. S. Joshi Publications
Thanedar A., Singh R., Joshi S, Cylindrical Grinding Performance Evaluation,, Proceedings of 2018 9th International Conference on Mechanical and Aerospace Engineering, ICMAE, 2018,
Joshi K., Bhandarkar U., Samajdar I., Joshi S.S, Microstructural Characterization of Thermal Damage on Silicon Wafers Sliced Using Wire-Electrical Discharge Machining, Journal of Manufacturing Science and Engineering, Transactions of the ASME, 2018,
Sonawane H., Joshi S.S, Modeling of chip geometry in ball-end milling of superalloy using strains in deformed chip (SDC) approach,, International Journal of Machine Tools and Manufacture, 2018,
Khandagale P., Bhakar G., Kartik V., Joshi S.S, Modelling time-domain vibratory deflection response of thin-walled cantilever workpieces during flank milling, Journal of Manufacturing Processes, 2018,
Laxmi V., Tripathi S., Joshi S.S., Agrawal A., Microfluidic Techniques for Platelet Separation and Enrichment, Journal of the Indian Institute of Science, 2018,
Srinivasan N., Sunil Kumar B., Kain V., Birbilis N., Joshi S.S., Sivaprasad P.V., Chai G., Durgaprasad A., Bhattacharya S., Samajdar I., Defining the Post-Machined Sub-surface in Austenitic Stainless Steels, Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 2018,
Trivedi D.B., Kumar A., Joshi S.S, Heat sink approach to improve machinability in dry drilling of titanium alloys, 7th International Conference on Industrial Technology and Management, ICITM, 2018,
Bhalerao N.B., Joshi S.S., Naik N.K., High Strain Rate and High Temperature Behavior of Ti-6Al-4V Alloy under Compressive Loading, Journal of Engineering Materials and Technology, Transactions of the ASME, 2018,
Gaddam A., Agrawal A., Joshi S.S., Thompson M.C., Slippage on a particle-laden liquid-gas interface in textured microchannels, Physics of Fluids, 2018,
Trivedi D.B., Kumar A., Joshi S.S, Surface integrity analysis in heat sink-based dry drilling of titanium alloy, Materials Today: Proceedings, 2018,
Jithin S., Raut A., Bhandarkar U.V., Joshi S.S., FE Modeling for Single Spark in EDM Considering Plasma Flushing Efficiency, Procedia Manufacturing, 2018,
Trivedi D.B., Kumar A., Joshi S.S.,, Drilling of Titanium Alloy using Heat Sink-based Ice Water Cooling, Procedia Manufacturing, 2018,
Thanedar A., Dongre G.G., Singh R., Joshi S.S, Surface integrity investigation including grinding burns using barkhausen noise (BNA), Journal of Manufacturing Processes,, 2017,
Jelia P.R., Agrawal A., Singh R.K., Joshi S.S., Design of textured surfaces for super-hydrophobicity, Sadhana - Academy Proceedings in Engineering Sciences, 2017,
Jithin S., Bhandarkar U.V., Joshi S.S., Analytical Simulation of Random Textures Generated in Electrical Discharge Texturing, Journal of Manufacturing Science and Engineering, Transactions of the ASME, 2017,
Patne H.S., Kumar A., Karagadde S., Joshi S.S, Modeling of temperature distribution in drilling of titanium, International Journal of Mechanical Sciences, 2017,
Khandagale P., Kartik V., Joshi S, Forced vibration response of a micro-cantilever beam with moving loads, International Conference on Advances in Mechanical, Industrial, Automation and Management Systems, AMIAMS, 2017,
Varote N., Joshi S.S., Microstructural Analysis of Machined Surface Integrity in Drilling a Titanium Alloy, Journal of Materials Engineering and Performance, 2017,
Gaddam A., Kattemalalawadi B.S., Agrawal A., Joshi S.S., Demarcating wetting states in textured microchannels under flow conditions by Poiseuille number, Microfluidics and Nanofluidics, 2017,
Joshi K., Ananya A., Bhandarkar U., Joshi S.S, Ultra thin silicon wafer slicing using wire-EDM for solar cell application, Materials and Design, 2017,
Deshmukh V., Kadam R., Joshi S.S, Removal of alpha case on titanium alloy surfaces using chemical milling, Machining Science and Technology, 2017,
Bhopale N.N., Pawade R.S., Joshi S.S, Surface quality analysis in ball end milling of Inconel 718 cantilevers by response surface methodology, Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 2017,
Gupta A., Joshi S.S., Modelling effect of magnetic field on material removal in dry electrical discharge machining, Plasma Science and Technology, 2017,
Joshi K., Sharma G., Dongre G., Joshi S.S., Numerical Modelling of Wire-EDM for Predicting Erosion Rate of Silicon, Journal of The Institution of Engineers (India): Series C, 2017,
Das R., Nayak N., Barshilia H.C., Joshi S.S, Wear and progression of life of plasma nitrided four-faceted high-speed steel drills with varying geometries, Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 2016,
Parle D., Singh R.K., Joshi S.S., Contribution of specific work of fracture to size effect in microcutting, Machining Science and Technology, 2016,
Tripathi S., Kumar Y.V.B., Agrawal A., Prabhakar A., Joshi S.S, Microdevice for plasma separation from whole human blood using bio-physical and geometrical effects, Scientific Reports, 2016,
Jayaram K., Joshi S.S.,, Design and development of a vision-based micro-assembly system, Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 2016,
Tailor P.B., Agrawal A., Joshi S.S, Numerical Simulation and Experimentation on Electrochemical Buffing, Journal of Manufacturing Science and Engineering, Transactions of the ASME, 2016,
Parle D., Singh R.K., Joshi S.S, Fracture energy evaluation using J-integral in orthogonal microcutting, Journal of Micro and Nano-Manufacturing, 2016,
Pawar S., Joshi S.S., Experimental analysis of axial and torsional vibrations assisted tapping of titanium alloy,, Journal of Manufacturing Processes, 2016,
Shrivastava K., Joshi S.S, Design and development of compliant microgripper-based assembly station, ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE), 2016,
Patil R., Shinde S., Marla D., Joshi S., Experimental analysis of burr formation in drilling of TI-6AL-4V alloy, International Journal of Mechatronics and Manufacturing Systems, 2016,
Das R., Joshi S.S., Barshilia H.C., Analytical model of progression of flank wear land width in drilling, ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE), 2016,
Kekade S., Patil S., Joshi S., Singh R., Parametric analysis of cylindrical plunge grinding on micro-alloyed steel using taguchi analysis, Key Engineering Materials, 2016,
Singh N., Agrawal A., Wanaskar K., Kartik V., Joshi S.S, Analyzing the effect of workpiece stiffness variation on the stability in flank milling of an impeller blade, ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE), 2016,
Gaddam A., Agrawal A., Joshi S.S., Thompson M.C, Utilization of Cavity Vortex to Delay the Wetting Transition in One-Dimensional Structured Microchannels,, Langmuir, 2015,
Gaddam A., Garg M., Agrawal A., Joshi S.S, Modeling of liquid-gas meniscus for textured surfaces: Effects of curvature and local slip length,, Journal of Micromechanics and Microengineering, 2015,
Tripathi S., Varun Kumar Y.V.B., Prabhakar A., Joshi S.S., Agrawal A., Passive blood plasma separation at the microscale: A review of design principles and microdevices, Journal of Micromechanics and Microengineering, 2015,
Tripathi S., Varun Kumar Y.V.B., Prabhakar A., Joshi S.S., Agrawal A, Performance study of microfluidic devices for blood plasma separation - A designer's perspective, Journal of Micromechanics and Microengineering, 2015,
Dongre G., Zaware S., Dabade U., Joshi S.S., Multi-objective optimization for silicon wafer slicing using wire-EDM process, Materials Science in Semiconductor Processing, 2015,
Sonawane H.A., Joshi S.S., Modeling of machined surface quality in high-speed ball-end milling of Inconel-718 thin cantilevers, International Journal of Advanced Manufacturing Technology,, 2015,
Mastud S.A., Kothari N.S., Singh R.K., Joshi S.S, Modeling debris motion in vibration assisted reverse micro electrical discharge machining process (R-MEDM), Journal of Microelectromechanical Systems, 2015,
Pawar O.A., Gaikhe Y.S., Tewari A., Sundaram R., Joshi S.S, Analysis of hole quality in drilling GLARE fiber metal laminates, Composite Structures, 2015,
Sonawane H.A., Joshi S.S, Analytical modeling of chip geometry in high-speed ball-end milling on inclined Inconel-718 workpieces, Journal of Manufacturing Science and Engineering, Transactions of the ASME, 2015,
Mali S., Joshi S.S., Three-dimensional simulation of staggered flow forming process, International Journal of Manufacturing Technology and Management, 2015,
Tailor P.B., Agrawal A., Joshi S.S., Parametric Understanding of Electro-Chemical Buffing (ECB) Using Current-Voltage Characterization, Machining Science and Technology, 2015,
Tailor P.B., Agrawal A., Joshi S.S, Numerical modeling of passive layer formation and stabilization in electrochemical polishing process, Journal of Manufacturing Processes, 2015,
Joshi S., Tewari A., Joshi S.S., Microstructural characterization of chip segmentation under different machining environments in orthogonal machining of Ti6Al4V, Journal of Engineering Materials and Technology, Transactions of the ASME, 2015,
Joshi S., Pawar P., Tewari A., Joshi S.S., Influence of ? phase fraction on deformation of grains in and around shear bands in machining of titanium alloys, Materials Science and Engineering A, 2014,
Joshi S.S., Marla D., Electrochemical Micromachining,, Comprehensive Materials Processing, 2014,
Parle D., Singh R.K., Joshi S.S., Ravikumar G.V.V., Modeling of microcrack formation in orthogonal machining, International Journal of Machine Tools and Manufacture, 2014,
Goel S., Joshi S.S., Abdelal G., Agrawal A, Molecular dynamics simulation of nanoindentation of Fe3C and Fe4C, Materials Science and Engineering A, 2014,
Marla D., Bhandarkar U.V., Joshi S.S., Models for predicting temperature dependence of material properties of aluminum, Journal of Physics D: Applied Physics, 2014,
Patil S., Joshi S., Tewari A., Joshi S.S, Modelling and simulation of effect of ultrasonic vibrations on machining of Ti6Al4V, Ultrasonics, 2014,
Bhopale N.N., Joshi S.S., Pawade R.S., Experimental Investigation into the Effect of Ball End Milling Parameters on Surface Integrity of Inconel 718, Journal of Materials Engineering and Performance, 2014,
Joshi S., Pawar P., Tewari A., Joshi S.S, Tool wear mechanisms in machining of three titanium alloys with increasing ?-phase fraction, Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 2014,
Joshi S., Pawar P., Tewari A., Joshi S.S, Effect of ? phase fraction in titanium alloys on chip segmentation in their orthogonal machining, CIRP Journal of Manufacturing Science and Technology, 2014,
Pawar S., Patil S., Joshi S., Singh R, An experimental analysis of ultrasonic vibration assisted tapping of Ti-6Al-4V, SAE Technical Papers, 2014,
Marla D., Bhandarkar U.V., Joshi S.S., A model of laser ablation with temperature-dependent material properties, vaporization, phase explosion and plasma shielding, Applied Physics A: Materials Science and Processing, 2014,
Mastud S.A., Kothari N.S., Singh R.K., Samuel J., Joshi S.S., Analysis of debris motion in vibration assisted reverse micro electrical discharge machining,, ASME 2014 International Manufacturing Science and Engineering Conference, MSEC 2014 Collocated with the JSME 2014 International Conference on Materials and Processing and the 42nd North American Manufacturing Research Conference, 2014,
Joshi S., Tewari A., Joshi S., Influence of preheating on chip segmentation and microstructure in orthogonal machining of Ti6Al4V, Journal of Manufacturing Science and Engineering, Transactions of the ASME, 2013,
Dongre G.G., Padwal P.S., Singh R.K., Joshi S.S.,, Effect of silver coating on silicon ingot slicing by wire-EDM process, Transactions of the North American Manufacturing Research Institution of SME, 2013,
Aakella P.S., Saravanan S., Joshi S.S., Solanki C.S., Pre-metallization processes for c-Si solar cells, Solar Energy, 2013,
Dongre G.G., Vesivkar C., Singh R., Joshi S.S, Modeling of silicon ingot slicing process by wire-electrical discharge machining, Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 2013,
Marla D., Barde V., Joshi S.S, Analytical model to predict temperature distribution and ablation depth in excimer laser micromachining, International Journal of Precision Engineering and Manufacturing, 2013,
Sapre P., Mall A., Joshi S.S., Analysis of electrolytic flow effects in micro-electrochemical grinding, Journal of Manufacturing Science and Engineering, Transactions of the ASME, 2013,
Tailor P.B., Agrawal A., Joshi S.S, Evolution of electrochemical finishing processes through cross innovations and modeling, International Journal of Machine Tools and Manufacture, 2013,
Agrawal S., Joshi S.S., Analytical modelling of residual stresses in orthogonal machining of AISI4340 steel, Journal of Manufacturing Processes, 2013,
Kumar P., More S., Singh R., Joshi S.S., Experimental characterization of plane and conformal hydrodynamic polishing of machined single crystal sapphire, Manufacturing Letters, 2013,
Marla D., Bhandarkar U.V., Joshi S.S., Modeling nanosecond pulsed laser ablation: A focus on temperature dependence of material properties, Manufacturing Letters, 2013,
Govindan P., Gupta A., Joshi S.S., Malshe A., Rajurkar K.P., Single-spark analysis of removal phenomenon in magnetic field assisted dry EDM, Journal of Materials Processing Technology, 2013,
Jha J.S., Joshi S.S., Numerical simulation of micro hot embossing of polymer substrate, International Journal of Precision Engineering and Manufacturing, 2012,
Mastud S., Singh R.K., Joshi S.S., Analysis of fabrication of arrayed micro-rods on tungsten carbide using reverse micro-EDM, International Journal of Manufacturing Technology and Management, 2012,
Dongre G., Singh R., Joshi S.S., Response surface analysis of slicing of silicon ingots with focus on photovoltaic application, Machining Science and Technology,, 2012,
Mastud S., Garg M., Singh R., Samuel J., Joshi S., Experimental characterization of vibration-assisted reverse micro Electrical Discharge Machining (EDM) for surface texturing, ASME 2012 International Manufacturing Science and Engineering Conference Collocated with the 40th North American Manufacturing Research Conference and in Participation with the Int. Conf., MSEC, 2012,
Dabade U., Joshi S., Machining of Al/SiCp metal matrix composites at low temperature heating prior to machining, Applied Mechanics and Materials, 2012,
Joshi S.S.,, Editorial, International Journal of Mechatronics and Manufacturing Systems, 2012,
Sonawane H.A., Joshi S.S., Analysis of machined surface quality in a single-pass of ball-end milling on Inconel 718, Journal of Manufacturing Processes, 2012,
Govindan P., Joshi S.S, Analysis of micro-cracks on machined surfaces in dry electrical discharge machining, Journal of Manufacturing Processes, 2012,
Joshi M., More S., Singh R.K., Joshi S.S., Balasubramaniam R., Suri V.K., Experimental characterization of hydrodynamic nanopolishing of flat steel plates, Precision Engineering, 2012,
Mittal R., Singh R.K., Joshi S.S, Elastohydrodynamic lubrication modeling of hydrodynamic nanopolishing process, Journal of Manufacturing Science and Engineering, Transactions of the ASME, 2012,
Mastud S.A., Garg M., Singh R., Joshi S.S, Recent developments in the reverse micro-electrical discharge machining in the fabrication of arrayed micro-features, Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 2012,
Pawade R.S., Joshi S.S, Analysis of acoustic emission signals and surface integrity in the high-speed turning of Inconel 718, Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture,, 2012,
Puthumana G., Joshi S.S, Investigations into performance of dry EDM using slotted electrodes, International Journal of Precision Engineering and Manufacturing, 2011,
Mastud S., Singh R.K., Samuel J., Joshi S.S, Comparative analysis of the process mechanics in micro-electrical discharge machining (EDM) and reverse micro-EDM, ASME 2011 International Manufacturing Science and Engineering Conference, MSEC , 2011,
Joshi S.S, Machining metal matrix composites using diamond tools,, Machining Technology for Composite Materials: Principles and Practice, 2011,
Govindan P., Agrawal R., Joshi S.S, Experimental investigation on dry EDM using helium gas dielectric,, International Journal of Manufacturing Technology and Management, 2011,
Lekkala R., Bajpai V., Singh R.K., Joshi S.S., Characterization and modeling of burr formation in micro-end milling, Precision Engineering, 2011,
Pawade R.S., Joshi S.S., Multi-objective optimization of surface roughness and cutting forces in high-speed turning of Inconel 718 using Taguchi grey relational analysis (TGRA), International Journal of Advanced Manufacturing Technology, 2011,
Gelu T.A., Joshi S.S., Naik N.K, Shear properties of acrylic under high strain rate loading, Journal of Applied Polymer Science, 2011,
Joshi S., Govindan P., Malshe A., Rajurkar K, Experimental characterization of dry EDM performed in a pulsating magnetic field, CIRP Annals - Manufacturing Technology, 2011,
Pawade R.S., Joshi S.S., Sonawane H.A., Bhopale N.N, Analysis and modeling of cutting forces in ball end milling of superalloy Inconel 718, Journal of the Institution of Engineers (India): Mechanical Engineering Division, 2011,
Pawade R.S., Joshi S.S, Mechanism of chip formation in high-speed turning of inconel 718, Machining Science and Technology,, 2011,
Marla D., Bhandarkar U.V., Joshi S.S., Critical assessment of the issues in the modeling of ablation and plasma expansion processes in the pulsed laser deposition of metals, Journal of Applied Physics, 2011,
Mall A., Agrawal A., Singh R.K., Joshi S.S., Numerical characterization of laminar bulk flow over textured surfaces,, Journal of Micro/Nanolithography, MEMS, and MOEMS, 2011,
Garg M., Agrawal A., Singh R.K., Joshi S.S, Microscopic textured surfaces for micro-fluidic applications, International Journal of Automation Technology,, 2011,
Dongre G.G., Vesvikar C., Singh R.K., Joshi S.S., Efficient dicing of silicon ingots for photovoltaic applications, Conference Record of the IEEE Photovoltaic Specialists Conference, 2010,
Sonawane H.A., Joshi S.S., Analytical modeling of chip geometry and cutting forces in helical ball end milling of superalloy Inconel 718, CIRP Journal of Manufacturing Science and Technology, 2010,
Vasantgadkar N.A., Bhandarkar U.V., Joshi S.S, A finite element model to predict the ablation depth in pulsed laser ablation, Thin Solid Films, 2010,
Sonawane H.A., Joshi S.S., Investigation on chip morphology and surface quality in high-speed ball-end milling of Inconel 718,, Key Engineering Materials, 2010,
Dabade U.A., Joshi S.S., Some aspects of improving integrity of machined surfaces on Al/SiCp metal matrix composites, Key Engineering Materials, 2010,
Govindan P., Joshi S.S, Experimental characterization of material removal in dry electrical discharge drilling, International Journal of Machine Tools and Manufacture, 2010,
Das S., Joshi S.S., Modeling of spark erosion rate in microwire-EDM, International Journal of Advanced Manufacturing Technology, 2010,
Mujumdar S.S., Mastud S.A., Singh R.K., Joshi S.S., Experimental characterization of the reverse micro-electrodischarge machining process for fabrication of high-aspect-ratio micro-rod arrays, Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 2010,
Dabade U.A., Sonawane H.A., Joshi S.S, Cutting forces and surface roughness in machining Al/SiCp composites of varying composition, Machining Science and Technology, 2010,
Jayaram K., Joshi S.S., Development of a flexure-based, force-sensing microgripper for micro-object manipulation, Journal of Micromechanics and Microengineering, 2010,
Mastud S.A., Singh R.K., Joshi S.S., Investigation of reverse micro-EDM process for generating high aspect ratio micro-electrode arrays, International Conferences on Multi-Material Micro Manufacture, 4M/International Conferences on Micro Manufacturing, ICOMM, 2009,
Joshi M., Singh R.K., Joshi S.S., Balasubramaniam R., Suri V.K., Preliminary investigation of hydrodynamic nanopolishing of flat steel plates, International Conferences on Multi-Material Micro Manufacture, 4M/International Conferences on Micro Manufacturing, ICOMM, 2009,
Pawade R.S., Sonawane H.A., Joshi S.S., An analytical model to predict specific shear energy in high-speed turning of Inconel 718, International Journal of Machine Tools and Manufacture, 2009,
Dabade U.A., Dapkekar D., Joshi S.S., Modeling of chip-tool interface friction to predict cutting forces in machining of Al/SiCp composites, International Journal of Machine Tools and Manufacture, 2009,
Dabade U.A., Joshi S.S, Analysis of chip formation mechanism in machining of Al/SiCp metal matrix composites, Journal of Materials Processing Technology, 2009,
Saxena I., Agrawal A., Joshi S.S, Fabrication of microfilters using excimer laser micromachining and testing of pressure drop, Journal of Micromechanics and Microengineering, 2009,
Puranik M.S., Joshi S.S., Analysis of accuracy of high-aspect-ratio holes generated using micro-electric discharge machining drilling, Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 2008,
Raghuram M.G.V.S., Joshi S.S, Modeling of polishing mechanism in magnetic abrasive polishing, 12th International Conference on Computer Methods and Advances in Geomechanics, 2008,
Gaikwad K.S., Joshi S.S., Modeling of material removal rate in micro-ECG process, Journal of Manufacturing Science and Engineering, Transactions of the ASME, 2008,
Jun M.B.G., Joshi S.S., DeVor R.E., Kapoor S.G, An experimental evaluation of an atomization-based cutting fluid application system for micromachining, Journal of Manufacturing Science and Engineering, Transactions of the ASME, 2008,
Basheer A.C., Dabade U.A., Joshi S.S., Bhanuprasad V.V., Gadre V.M., Modeling of surface roughness in precision machining of metal matrix composites using ANN, Journal of Materials Processing Technology, 2008,
Pawade R.S., Joshi S.S., Brahmankar P.K, Effect of machining parameters and cutting edge geometry on surface integrity of high-speed turned Inconel 718, International Journal of Machine Tools and Manufacture, 2008,
Thao O., Thao O., Joshi S.S, Analysis of heat affected zone in the micro-electric discharge machining, International Journal of Manufacturing Technology and Management, 2008,
Marla D., Joshi S.S., Mitra S.K, Modeling of electrochemical micromachining: Comparison to experiments, Journal of Micro/Nanolithography, MEMS, and MOEMS, 2008,
Pawade R.S., Joshi S.S., Brahmankar P.K., Rahman M., An investigation of cutting forces and surface damage in high-speed turning of Inconel 718, Journal of Materials Processing Technology, 2007,
Dabade U.A., Joshi S.S., Balasubramaniam R., Bhanuprasad V.V, Surface finish and integrity of machined surfaces on Al/SiCp composites, Journal of Materials Processing Technology, 2007,
Kiran M.P.S.K., Joshi S.S, Modeling of surface roughness and the role of debris in micro-EDM, Journal of Manufacturing Science and Engineering, Transactions of the ASME, 2007,
Ballou J.R., Joshi S.S., DeVor R.E., Kapoor S.G, Burr formation in drilling intersecting holes with Machinable Austempered Ductile Iron (MADI™), Journal of Manufacturing Processes, 2007,
Subbiah S., Melkote S., Dabade U.A., Banait N., Joshi S.S, Evidence of ductile tearing ahead of the cutting tool and modeling the energy consumed in material separation in micro-cutting, Proceedings of the International Conference on Manufacturing Science and Engineering, 2006,
Girma B., Joshi S.S., Raghuram M.V.G.S., Balasubramaniam R., An experimental analysis of magnetic abrasives finishing of plane surfaces, Machining Science and Technology, 2006,
Patel K.M., Joshi S.S., Mechanics of machining of face-milling operation performed using a self-propelled round insert milling cutter, Journal of Materials Processing Technology, 2006,
Dhanik S., Joshi S.S.,, Modeling of a single resistance capacitance pulse discharge in micro-electro discharge machining, Journal of Manufacturing Science and Engineering, Transactions of the ASME, 2005,
Baro P.K., Joshi S.S., Kapoor S.G., Modeling of cutting forces in a face-milling operation with self-propelled round insert milling cutter, International Journal of Machine Tools and Manufacture, 2005,
Dhanik S., Joshi S.S., Ramakrishnan N., Apte P.R, Evolution of EDM process modelling and development towards modelling of the micro-EDM process, International Journal of Manufacturing Technology and Management, 2005,
Joshi S.S., Melkote S.N, An explanation for the size-effect in machining using strain gradient plasticity, Journal of Manufacturing Science and Engineering, Transactions of the ASME, 2004,
Pendse D.M., Joshi S.S, Modeling and optimization of machining process in discontinuously reinforced aluminium matrix composites, Machining Science and Technology,, 2004,
Chowdhuri S., Joshi S.S., Rao P.K., Ballal N.B., Machining aspects of a high carbon Fe3Al alloy, Journal of Materials Processing Technology, 2004,
Dabade U.A., Joshi S.S., Ramakrishnan N., Analysis of surface roughness and chip cross-sectional area while machining with self-propelled round inserts milling cutter, Journal of Materials Processing Technology, 2003,
Joshi S.S., Ramakrishnan N., Ramakrishnan P.,, Micro-structural analysis of chip formation during orthogonal machining of Al/SiCp composites, Journal of Engineering Materials and Technology, Transactions of the ASME, 2001,
Joshi S.S., Ramakrishnan N., Ramakrishnan P.,, PCD in the machining of DRA composites, Industrial Diamond Review, 2001,
Joshi S.S., Ramakrishnan N., Nagarwalla H.E., Ramakrishnan P., Wear of rotary carbide tools in machining of Al/SiCp composites, Wear,, 1999,
Joshi S.S., Ramakrishnan N., Ramakrishnan P., Analysis of chip breaking during orthogonal machining of Al/SiCp composites, Journal of Materials Processing Technology, 1999,
Joshi S.S., Ramakrishnan N., Sarathy D., Ramakrishnan P, Study of cutting forces while turning Al/SiCp composites using rotary carbide tools, Materials and Manufacturing Processes, 1998,